达州附近有没有服务

 Jinan Ningrui Machinery Equipment Co., Ltd
 Hydraulic sawing machine
  • 60s manual response
  • Give technical reply within 30 min
  • 24 hour free solution

Hydraulic sawing machine

Most of the horizontal band sawing machines, hydraulic sawing machines, adjustable view point sawing machines, vertical band sawing machines, CNC band sawing machines, gantry band sawing machines, shearing band sawing machines, and small band sawing machines, are mostly enclosed oil tanks. Filtration. During construction, water, emulsion, dust, fiber debris and other mechanical debris shall be prevented from invading. After the pipes and components of the sawing system are filled with oil, the oil volume of the hydraulic oil tank shall be kept within the designated oil level plan. Operation of hydraulic system of band saw

Application fields:

7 * 24-hour free hotline 0531-84233787

Horizontal band sawing machine Hydraulic sawing machine A series of sawing machines, such as adjustable view point sawing machine, vertical band sawing machine, CNC band sawing machine, gantry type band sawing machine, shear band sawing machine and small band sawing machine, are mostly enclosed oil tanks. Filtration. During construction, water, emulsion, dust, fiber debris and other mechanical debris shall be prevented from invading. After the pipes and components of the sawing system are filled with oil, the oil volume of the hydraulic oil tank shall be kept within the designated oil level plan. Before the hydraulic system of band saw is put into operation, it must be cleaned carefully. Strict filtration is required when refueling. Always check the oil filter of band sawing machine, replace the filter immediately after contamination, and check the quality of hydraulic oil as planned. The technical department specially reminds our customers that if your band saw works normally, the following three problems should be paid attention to in the hydraulic system:

First, the oxidation degree of hydraulic oil of band sawing machine

If the color of the hydraulic oil is dark brown and has an unpleasant smell, it indicates that it has been oxidized. The deeper the brown, the stronger the odor and the stronger the oxidation degree. This situation should be replaced by new oil. The servo position control module of sawing machine system combines position control with sampling interpolation and preview control. Due to the electromagnetic mechanical lag and motion inertia, it is not possible to control the feed slide to move 0.1 mm by "opening" and "closing".

Moisture content of hydraulic saw band

If the hydraulic oil of the sawing machine is milky white, the smell will not change, which means that too much water is mixed and a small amount of hydraulic oil will drip on the hot iron plate. If there is a "buzzing" sound, it indicates that the water content is rich, and the new oil should be replaced immediately.

3. Impurity content in hydraulic oil of band sawing machine

Take a few drops of hydraulic oil from the mailbox of the sawing machine and rotate it with your fingers. If there are more metal particles or flash points, the hydraulic oil is rich in mechanical impurities. It must be deposited on No. 42 hydraulic oil, then filtered and used. Please change the oil when ordering. After shutdown, operate the operating equipment to a higher position, shut down the equipment, use the weight of hydraulic oil, and drain the oil when the hydraulic oil becomes hot to clean the fuel tank and pipeline. Please fill in the new oil.

Our company specializes in the production of various types of sawing machines, cutting effect is superior, advanced technical performance, products sold all over the country. This is the sawing material of your choice. Welcome to contact us to order. The hydraulic transmission system of band sawing machine is composed of pump, valve, oil cylinder, oil tank, pipeline, etc. The hydraulic circuit includes lifting and lowering the saw blade bundle and clamping the workpiece under electronic control. The stepless speed regulation of feed speed can be realized by the speed regulating valve to meet the sawing requirements of different raw materials. CNC saw is driven by automatic wheel and driven wheel. The cutting direction of the saw blade is controlled by the guide rail control frame. After adjusting the rotating bearing, straighten and straighten the band saw blade, and then sweep the saw blade away by the sweeper. The guide rail control frame is supported by the piston rod of hydraulic cylinder, which can fall into the sawn timber. The band saw machine is equipped with manual or hydraulic cylinder clamping and locking mechanism, as well as hydraulic operation valve switch.


 Hydraulic sawing machine

Humanized design, more convenient production and use

 Hydraulic sawing machine

Advantages of hydraulic sawing machine

Technical parameters of hydraulic sawing machine

Main technical parameters Company
*Large bore diameter mm forty
*High feed resistance N sixteen thousand
Spindle * high output torque Nm three hundred and fifty
Taper of spindle hole Morse four
Main motor power Kw three
Spindle speed range r/min 31.5-1400 (grade 12)
X / Y / X fast moving speed mm/min 8000/8000/7000
Up and down travel of headstock mm 600 (mobile)
Left and right travel (x axis) mm eight hundred and fifty
Fore and aft travel (Y axis) mm six hundred
Up and down travel of spindle mm 250 (automatic 240)
Distance between main end face and worktable mm 0-800
Table size mm 1000×650
Table area mm 850×550
Positioning accuracy (x, y) mm 0.05(0.04)
Repeat positioning accuracy (x, y) mm 0.02(0.015)
Machine weight kg three thousand
Overall dimension (length × width × height) mm 2450×2160×2550


More models can also contact us to support customization

Customized service process

01 /06

01

Consulting customer service
All you need is one phone call. Leave the rest to us

02

Understanding needs
Talk to our sales team in detail

03

Planning and design
Professional engineers according to your needs to give a reasonable plan

04

Manufacturing
We will complete the quality and quantity in a reasonable time

05

Technical installation
Professional installation team on site installation, commissioning to stable production

06

Post maintenance
If you have any problems later, you can contact the after-sales engineer

200000+ Customers' choice

With good reputation, excellent quality and sound after-sales service, Jinan Ningrui has won praise in the world, and has made brilliant achievements in many enterprises at home and abroad!

Related cases

24-Hour Hour Hotline
0531-84233787
Online consultation

7 * 24 hours online service

Headquarters address:

Jibei street xibali dongshou-1, Jiyang County, Jinan City, Shandong Province

Online Message

If you are looking for related products or have any other questions, please call our sales hotline at any time 0531-84233787 , you can also leave us a message below, we will serve you warmly!

Online consultation

Ask for a quotation

Sales Hotline

Sales Hotline: 0531-84233787