达州附近有没有服务

 Jinan Ningrui Machinery Equipment Co., Ltd
 Gantry band sawing machine
  • 60s manual response
  • Give technical reply within 30 min
  • 24 hour free solution

Gantry band sawing machine

In order to fill the hydraulic oil of gantry type band sawing machine, apply a layer of oil on the sliding and rolling parts of the sawing machine, adjust the tension of the saw band of the band saw machine and open the gear switch only touching the stop. Fill the water tank with coolant. After the preparation work is completed, connect the power supply to the gantry band sawing machine to ensure the grounding specification is firm. Turn on the power switch and start the test run. Correct the wiring according to the direction of rotation indicated on the label of the band saw. Listen to the movements. stay

Application fields:

7 * 24-hour free hotline 0531-84233787

To fill in Gantry band sawing machine Apply a layer of oil on the sliding and rolling parts of the sawing machine, adjust the tension of the saw band of the band sawing machine and open the gear switch only touching the stop. Fill the water tank with coolant. After the preparation work is completed, connect the power supply to the gantry band sawing machine to ensure the grounding specification is firm. Turn on the power switch and start the test run. Correct the wiring according to the direction of rotation indicated on the label of the band saw. Listen to the movements. Please allow the bow to operate in the process. Actively lower the saw band to 0.5-1 mm below the working table. The limit switch will rise automatically when touching the bumper. Whether it will stop automatically when the upper azimuth altitude is reached. Three consecutive experiments were carried out. Check the lifting cylinder equipment of the saw and check the bow shape. If the lifting and lowering are firm and flexible, clamp and loosen the cylinder equipment. When clamping, check whether it is firmly clamped and loosened. Adjust the speed control button of the gantry saw to first gear and then to second gear. The experiment was repeated 3 times. After the main motor power switch is turned on, the water pump will start at the same time. Normal operation of the cooling system. Adjust the valve to check that the coolant is circulating. The trial saw can be determined by loading and clamping.

The gantry band sawing machine needs the operator to carry out, so it needs professional training to master the operation and maintenance skills. Wear tight protective clothing and cuffs before operating the metal band sawing machine. Don't open the hem of the shirt. Stop wearing gloves. Wear or remove clothing or cloth around the sawing machine to avoid injury to the sawing machine. Wear a hard hat, braid on the hat, no skirt and slippers.

The operator of band sawing machine can understand the part drawing, simple assembly drawing and conventional part drawing, calculate the data consumption and loss of unit or batch during unloading, correctly realize the process document during unloading, and put forward improvement suggestions. It can reasonably save materials, color the data according to the appearance, and accurately indicate the data trademark. It can operate and adjust the gantry band sawing machine correctly, and it will be maintained for a short time. It will correctly load and unload the band saw blade, repair the blunt saw blade, and skillfully adjust the special fixture of the band saw machine, master the methods of positioning, measuring and multi-piece clamping by using accessories, skillfully use and protect common measuring tools, protect multiple sawing machines, help repair, and train apprentices and trainees.


 Gantry band sawing machine

Humanized design, more convenient production and use

 Gantry band sawing machine

Advantages of gantry band sawing machine

Technical parameters of gantry band sawing machine

Main technical parameters Company
*Large bore diameter mm forty
*High feed resistance N sixteen thousand
Spindle * high output torque Nm three hundred and fifty
Taper of spindle hole Morse four
Main motor power Kw three
Spindle speed range r/min 31.5-1400 (grade 12)
X / Y / X fast moving speed mm/min 8000/8000/7000
Up and down travel of headstock mm 600 (mobile)
Left and right travel (x axis) mm eight hundred and fifty
Fore and aft travel (Y axis) mm six hundred
Up and down travel of spindle mm 250 (automatic 240)
Distance between main end face and worktable mm 0-800
Table size mm 1000×650
Table area mm 850×550
Positioning accuracy (x, y) mm 0.05(0.04)
Repeat positioning accuracy (x, y) mm 0.02(0.015)
Machine weight kg three thousand
Overall dimension (length × width × height) mm 2450×2160×2550


More models can also contact us to support customization

Customized service process

01 /06

01

Consulting customer service
All you need is one phone call. Leave the rest to us

02

Understanding needs
Talk to our sales team in detail

03

Planning and design
Professional engineers according to your needs to give a reasonable plan

04

Manufacturing
We will complete the quality and quantity in a reasonable time

05

Technical installation
Professional installation team on site installation, commissioning to stable production

06

Post maintenance
If you have any problems later, you can contact the after-sales engineer

200000+ Customers' choice

With good reputation, excellent quality and sound after-sales service, Jinan Ningrui has won praise in the world, and has made brilliant achievements in many enterprises at home and abroad!

Related cases

24-Hour Hour Hotline
0531-84233787
Online consultation

7 * 24 hours online service

Headquarters address:

Jibei street xibali dongshou-1, Jiyang County, Jinan City, Shandong Province

Online Message

If you are looking for related products or have any other questions, please call our sales hotline at any time 0531-84233787 , you can also leave us a message below, we will serve you warmly!

Online consultation

Ask for a quotation

Sales Hotline

Sales Hotline: 0531-84233787