达州附近有没有服务

The adjustment of cutting speed of angle sawing machine is very important for machine users

Time: March 17, 2020 Author: Ning Rui, Jinan Back to list

If you are looking for related products or have any other problems, you can call our sales hotline at any time, or click the button on the right to inquire about the quotation online!

National unified sales hotline: 0531-84233787

Angle sawing machine is a commonly used cutting tool in industrial sawing. Its cutting angle range is wide and its precision is high. The sawing workpiece meets the production requirements very well. Moreover, the band sawing machine is easy to operate and easy to control. Therefore, angle band sawing machine is widely used in sawing workpiece with angle. Angle sawing machine The adjustment of cutting speed is very important for machine tool users! So how to correctly adjust the cutting speed of angle band saw machine?

When the angle band saw machine cuts high hardness and high strength materials, it is suitable for low speed, medium carbon steel and medium speed structural steel materials. When cutting low carbon steel and non-ferrous metals, high speed is applied. After the saw blade is installed on two saw wheels and guide devices, the saw blade is properly tensioned to ensure normal sawing. The tension of NC band sawing machine is too large, the band saw blade is easy to break, which accelerates the motion pair. Wear, damage the overall rigidity, increase the no-load power, reduce the service life of the horizontal band saw, the tension is too small, easy to slide.

The following steps should be followed when starting the angle saw:

1. According to the size and material of the workpiece, select the appropriate cutting speed and feed speed of the saw band;

2. Turn on the power supply of the angle saw for the second time and start the hydraulic system;

3. Put the workpiece in the vise, and use the saw band to keep the workpiece surface between 80 ~ 100 mm and adjust the angle;

4. Insert the coolant nozzle into the nozzle of the chip removal cover to adjust the nozzle to the cutting area;

 QQ screenshot 20200314155725.jpg

5. Adjust the position of the feeding block of the angle sawing machine so that it can be in the suitable length of the workpiece;

6. Forward feeding makes the end face of the workpiece contact with the stop to clamp the workpiece;

7. Determine and reserve the main equipment parameters;

8. Press down the down key of the saw frame, and the machine tool enters the cutting cycle state;

9. After the material cutting is completed, put the clamping knob in the loosening position, and the workpiece is released, and then the second cycle cutting is carried out;

In order to make the angle sawing machine can get better and better safe use, we must follow the above steps in daily use. If it is not guaranteed, unexpected accidents may occur. Safe use requires us to start from the details, and it is absolutely not necessary to wait until there are problems to solve them. In addition, if the clamping surface of the saw band of the guide frame is not vertical to the working table during the sawing process of the angle band sawing machine, the saw band shall be installed, and the perpendicularity between the side of the saw band and the working table shall be checked with a right angle square. If necessary, the fastening screw on the small bracket shall be loosened, and the precision shall be adjusted by the jacking wire. After the adjustment, the sawing effect of the band saw will be affected.


Online Message

If you are looking for related products or have any other questions, please call our sales hotline at any time 0531-84233787 , you can also leave us a message below, we will serve you warmly!

  • Your name:
  • *Contact number:
  • *Demand information content:
Contact us

You just need to fill in your requirements, purpose, we will be customized for your products.

Contact information

Company address: xibali dongshou-1, Jibei street, Jiyang County, Jinan City, Shandong Province

Tel: 0531-84233787

You can also consult manual customer service online

Recommended news

Jinan Ningrui Machinery Equipment Co., Ltd. address: East head-1, xibali street, Jiyang County, Jinan City, Shandong Province

Online consultation

Ask for a quotation

Sales Hotline

Sales Hotline: 0531-84233787